[UV test chamber
]Official website:
Artificial creation, reproducing strong ultraviolet light exposure
The UV weather resistance test chamber uses fluorescent ultraviolet lamps as the light source to simulate the ultraviolet radiation and ultraviolet radiation in natural sunlight. Condensation, accelerated weathering testing of materials is performed to obtain results of the material's weathering resistance. It can simulate environmental conditions such as ultraviolet rain, high temperature, high humidity, condensation, and darkness in natural climates. By reproducing these conditions, it can be combined into a cycle and let it automatically execute to complete the number of cycles.
The materials are carefully selected to create first-class testing equipment for you
A black aluminum plate is used to connect the temperature sensor
A blackboard temperature instrument is used to control the heating, making the temperature more stable.
Use an ultraviolet fluorescent lamp with a rated power of . Ultraviolet fluorescent lamp tubes are distributed on both sides of the machine, one on each side. There are A and B light sources for users to choose and configure. (Choose one)
Easy to operate, beautiful appearance, easy to open and close
The box lid is a two-way flip-top type, easy to open and close
The actual studio consists of test samples and brackets. Internal wall, trapezoid
Intelligent operation, precise temperature control and high reliability
Intelligent series of Korean Autonics temperature controllers, control accuracy ℃
Independent control time of light and condensation And the time of alternating cycle control can be set arbitrarily within a thousand hours
UV test chamber
Working principle: By simulating environmental conditions such as ultraviolet rain, high temperature, high humidity, condensation, and darkness in the natural climate , then reproduce these conditions, combine them into a loop, and let it execute automatically for the number of loops. form a natural climate.
I am honored to recommend it to you! The UV aging test chamber is one of the important products of Shanghai Linpin Instrument Co., Ltd. The following is detailed information, please browse:
UV test chamber
Specifications and technical parameters
Model
Studio size:
Overall dimensions:
Temperature range + ℃ ~ ℃
Humidity range %R
Temperature fluctuation degree ℃ (no load)
Distance between lamps:
Distance between sample and lamp:
UV lamp: Branch (well-known American brand)
Lamp power branch
UV wavelength: ~
Simulated condensation: Condensation system time is adjustable
UV exposure simulation Condensation time range: ~
Supported samples: *
Sample quantity: approximately
Test time: ~ Adjustable
Irradiance range/
UV test chamber
Installation site:
The ground is flat and well ventilated
There is no strong vibration around the equipment
There is no influence of strong electromagnetic fields around the equipment
There is no flammable or explosive corrosion around the equipment Reactive substances and dust
Installation requirements
Leave appropriate space for use and maintenance around the equipment, as shown in the figure:
: not less than
not less than
: Not less than
(Note: (The tilt angle of the equipment cannot exceed ℃))
UV test chamber
Environmental conditions:
Temperature: ℃～＋℃ (hours Average internal temperature ℃)
Relative humidity %R
Air pressure: ~
Power supply conditions three-phase four-wire + protective ground wire, voltage range: ()
Frequency allowed fluctuation range: ( )
The grounding resistance of the protective ground wire is less than
The user is required to configure an air or power switch of corresponding capacity for the equipment at the installation site, and this switch must be independent for use by the equipment
Water supply conditions: Equipment humidification Purified water must be used
[Linpin Shares
] Global free inquiry hotline: Domestic product consultation:
The best UV test chamber in Shanghai-UV aging test chamber manufacturer